Home
ABOUT US PRODUCTS SERVICES NEWS CONTACT US  
 
  Your Position: Home > Random Tower packing > Tri-pack, Tri pak > Gas scrubber packing
 

TRI PACK

 

Gas scrubber packing

Tri-Packs ® energy conserving tower packing media.

Gas scrubber packing is unique geometry, weight and construction combine to give users highest column stability and maximum resistance to nesting.

 

Gas scrubber packing This results in extraordinarily high scrubbing efficiency, and minimizes total packing depth required.

The distinctive shaping of ribs, struts and drip rods gives Tri-Packs a solid advantage in wetting characteristics, and the ability to maintain uniform liquid distribution throughout the bed.

Tri-Packs also prevent clogging, because there are no flat surfaces or minute openings to harbor particulate. They eliminate puddling too, because they are free of corners and valleys, and they greatly minimize wasteful liquid flow down the wall surfaces. Tri-Packs further prevents dry spots and compression interlock, two phenomena common to other packing media. Both conditions cause liquid and air channeling an significantly decrease media efficiency.

Note to specifiers: Surface area alone does not guarantee performance. To much surface area can impede gas/liquid contact and create higher pressure drops, thus increasing horsepower requirements and operating expense. Tri-Packs provides the optimum surface-to-open-area ratio for achieving best mass transfer efficiency and lowest operating costs. It is the industry standard for random dump tower packing media.

Gas scrubber packing  is available in four sizes and is manufactured in a wide variety of injection molded resins, including polypropylene, PVC, KYNAR ®, Halar®, Teflon® and glass-filled polypropylene.

Physical Properties of Tri-Packs Packings

 

 

SPECIFICATIONS/PROPERTIES
 

 

Properties Table
Size (in.)
1"
1 ¼”
2"
3 ½”
Geometric
Surface Area
(ft
2/ft3)
85
70
48
38
Packing
Factor
(1/ft)
28
25
16
12
Void
Space
(%)
90
92
93.5
95
Bulk Density
(lb/ft
3)
(PP)
6.2
5.6
4.2
3.3

 

Material
Polypropylene
(PP)

TopEx® (LCP)
Polyethylene
(PE)

Kynar® (PVDF)
Polypropylene
Glass-Filled
(PPG)
Halar® (ECTFE)
Noryl® (PPO)

Teflon® (PFA)
Polyvinylchloride
(PVC)
 
Tefzel® (ETFE)
CorzanTM
(CPVC)

Tefzel®
Glass-Filled

(ETFE-G)
Other plastics are available upon request.

 

 


New Product
Polypropylene Tellerette 3K

Polypropylene Tellerette 3K

ETFE +25% Glass Tri packs 2inch

ETFE +25% Glass Tri packs 2inch

Flue Gas Desulfurization

Flue Gas Desulfurization



 
 
Deutsch Español Français Italiano Português 日本の 한국어 العربية български hrvatski česky
Dansk Nederlands suomi Ελληνικά हिन्दी norsk Polski Română русский Svenska
Add:No.181,HuiZhan Road ,Ningbo city, China 315000 Tel: 0086-574-87238791,8792,8793 Fax: 0086-574-87238794
E-mail: sales@rubbersealing.com, tcipacking@gmail.com Skype: tcipacking
Copyright (c) INTERSTAR All Right Reserved Friendly link | Site map | link