Home
ABOUT US PRODUCTS SERVICES NEWS CONTACT US  
 
  Your Position: Home > Random Tower packing > Tellerette ring > Tellerette 2R
 

Tellerette 2K, 3k, 1R, 2R, 3R

tellerette 2r
T.C.I
Tellerette® Type 2R are a high efficiency plastic tower packing designed for use in wet scrubbers, cooling towers, mist eliminators, absoption columns and gas strippers. They provide a surface area equal to many other packings but with much greater liquid surface availability. There are many times more interstitial hold up points than other packings, and this has the effect of continuously generating fresh liquid surface area which is the key for high mass transfer between the gas and liquid phases. They have a non-wetting surface, and are used in vessels with a diameter of more than 400mm; for smaller diameters use Tellerette® Type 1.

BENEFITS
Better Mass Transfer
Because of the shape with many interstitial points, Tellerette® Type 2R liquid surface area is constantly regenerated, and this has been found to be more important to mass transfer than surface area alone. The design constantly renews the liquid surface at no additional cost in energy. This promotes high gas absorption efficiencies because of this natural agglomeration/dispersion cycle, a cycle that continuously exposes fresh liquid surface area to the gas flow.

Better Particulate Collection
The unique filamentous toroidal helix shape is designed to take advantage of inertial impact to collect solid and liquid particulates. Because the open, filamentous shape eliminates orifices where solids can drop out and accumulate, Tellerette® Type 2R packings are effective with high-solid particulate loadings. Tellerette® Type 2R packings are also effective mist eliminators following a wet scrubber.

Low Pressure Drop
The open filamentous shape of Tellerette® Type 2R packing minimises restrictions to the gas flow through the packed bed thus minimising gas pressure drop and energy consumption.
Random Packed
Tellerette® Type 2R packing is placed in a vessel by random dumping thus minimising installation time.
No Liquid Redistributors Needed
Given proper initial liquid distribution such as with a full cone spray nozzle, the liquid is not channelled to the sides thus eliminating the need for liquid redistributors part way down a column.
tellerette

tellerette

Tellerette 2K || Tellerette 2R ||


New Product
Polypropylene Tellerette 3K

Polypropylene Tellerette 3K

ETFE +25% Glass Tri packs 2inch

ETFE +25% Glass Tri packs 2inch

Flue Gas Desulfurization

Flue Gas Desulfurization




 
 
Deutsch Español Français Italiano Português 日本の 한국어 العربية български hrvatski česky
Dansk Nederlands suomi Ελληνικά हिन्दी norsk Polski Română русский Svenska
Add:No.181,HuiZhan Road ,Ningbo city, China 315000 Tel: 0086-574-87238791,8792,8793 Fax: 0086-574-87238794
E-mail: sales@rubbersealing.com, tcipacking@gmail.com Skype: tcipacking
Copyright (c) INTERSTAR All Right Reserved Friendly link | Site map | link