|
|
|
Style 113A 3-Convolute Expansion Joint
Style 113A Convoluted PTFE Bellows Expansion Joints offer the best combination of low spring-rate flexibility, temperature resistance, and the chemical inert properties of PTFE material. The Style 113A 3-Convolute Expansion Joints were designed to meet the needs of the HVAC, high-technology, and chemical/petrochemical industries. The bellows connectors are versatile and will 1) absorb pipe movements and stress; 2) isolate mechanical vibration; 3) reduce system noise; 4) protect against surge forces. connectors are suitable for connection to metallic piping or plastic lined metallic piping.
The construction of the connector utilizes 2, 3, or even 5 molded convolutions of white PTFE. These convolutions are reinforced with metallic rings between the bellows for pressure rating and stability. Standard galvanized ductile iron backing flanges are protected by the lip of the PTFE bellows, so that all wetted surfaces are PTFE. Steel limit rods are factory installed. Additional convolutions provide greater movement capability. Style 113(316)A include Type 316 stainless steel backing flanges and hardware. Options include high purity cleaning and packaging.
Pressure Range |
|
150 PSIG to 190 PSIG @ 70°F |
Sizes |
|
1" through 12" |
Anchor Base |
|
None. Can be ordered |
Bellow Material |
|
Molded white PTFE. Three convolutes |
Flanges |
|
Plated carbon steel |
Maximum Travel |
|
0.50" to 1.125" (Depending on size) |
Reinforcing Rings |
|
Series 300 stainless steel |
Tie Rods |
|
Plated carbon steel w/PTFE grommets |
Expansion Joints for electricity photos |
|
|
|
|
|
Pall ring | Tellerette ring | IMTP ring | Ceramic Alumina ball | PTFE expansion joint | Rubber expansion | Liquid distributor |
|