|
Corrugated wire mesh tower packing
Corrugated wire mesh tower packing is made from Knitted wire mesh, and it is used throughout the process industry in the separation of small liquid droplets from a gas or vapour stream. the Gravity of corrugated wire mesh tower packing will then cause the large droplets to fall through the mesh pad and collect in the vessel sump. "Dry" gas will exit through the downstream side of the while the liquid is removed by Corrugated wire mesh tower packing from the vessel through a dump valve. The use of Corrugated wire mesh tower packing can be incorporated into both vertical and horizontal vessel configurations.
Corrugated wire mesh tower packing is available in a wide range of materials, include stainless steels, 304, 316, 316L, Carbonsteels. Aluminium, copper bronze etc. Further materials available on request.
Application for Corrugated wire mesh tower packing:
◆ Atmospheric rectification and vacuum rectification, application fields similar to metal wire gauze packing and special technology such as requiring titanium or aluminum gauze packing.
◆ Substituting for random packing and revamping some tray towers in appropriate conditions.
◆ Absorption requiring low resistance and distillation with heat pump.
The technical specification for Corrugated wire mesh tower packing:
|
Type
|
specifific surface are m2/m3
|
Void Volume
%
|
Heaping Weight
Kg/m3
|
Wave
Height
mm
|
Theoretical plate
number
m-1
|
Δ P
Pa/m
|
Max.F-factor
m/s(kg/m3)0.5
|
|
SW-1
|
600
|
91.6
|
140
|
4.5
|
6.0-8.0
|
260-460
|
1.4-2.2
|
|
SW-2
|
450
|
95.5
|
360
|
6.5
|
4.0-5.0
|
220-240
|
1.6-1.8
|
| 
Deutsch
Español
Français
Italiano
Português
日本の
한국어
العربية
български
hrvatski
česky
Dansk
Nederlands
suomi
Ελληνικά
हिन्दी
norsk
Polski
Română
русский
Svenska